Three-component self-leveling floor, coating thickness from 3.0 to 6.0 mm. Litacryl SL 600 - thick-layer self-leveling floor, designed for intensive operating conditions.
The coating has a smooth glossy surface, to impart haze, it can be coated with a special polyurethane varnish. The slip coefficient of this self-leveling floor is C 11 (R 11) and makes it possible to use it even in wet rooms, such as beverage bottling plants, food processing, leather processing, leather industry, spinning and pharmaceutical industries. This floor design is resistant to temperature extremes and mechanical stress.
Often Litacryl SL 600 self-leveling floor is considered as an alternative to acid-resistant tiles, with the advantage of the absence of seams in which water, pollution and pathogenic microorganisms can accumulate.
on the application: Floors for pharmaceutical plants and health care facilities
Three-component self-leveling floor, coating thickness from 1.5 to 3.0 mm. Litacryl SL 300 - self-leveling floor based on polyurethane resin. It has excellent flowability, which facilitates the installation and speeds up its process. This coating ...
on the application: Floors for garages, parkings, service stations, Floors for the food industry, Floors for pharmaceutical plants and health care facilities
Highly filled thick-layer self-leveling floor Litacryl MХ, application thickness 6.0 - 10.0 mm. Litacryl MХ is a highly filled polyurethane-cement self-leveling floor. This type of coating combines two properties: high resistance to physical and ...
on the application: Floors for the agricultural infrastructure, Floors for the administration offices, Floors for garages, parkings, service stations
Three-component low viscosity dyed composition based on modified polyurethane resin. Coating properties Application thin coating protects against water prevents the absorption of oil/gasoline prevents dust formation of the concrete ...
on the application: Floors for the food industry, Floors for the agricultural infrastructure
Self-leveling floor with a rough texture Litacryl DS, application thickness from 3.0 to 12.0 mm. Coating properties Application designed for intensive mechanical loads anti-slip coating visually hides uneven ground used in rooms with water ...
on the application: Floors for garages, parkings, service stations, Floors for the administration offices
Decorative self-leveling floor Litacryl DR with acrylic flocks and the ability to adjust the coating thickness from 1 mm to 10 mm. Coating properties Application decorative coating choice selection of coating thickness hides operational defects of ...
on the application: Floors for garages, parkings, service stations, Floors for the food industry, Floors for the administration offices, Floors for pharmaceutical plants and health care facilities
Litacryl MG is a floor covering with marble and granite chips from 6.0 to 10.0 mm thick. Coating properties Application designed for harsh environments high strength characteristics resistance to temperature drops -30°C/+100°C the coating ...